20ft x 48in Oval Hydrium Steel Above Ground Pool Set - Outlet

Yes, Bestway Hydrium pools are designed for durability and can be left up year-round, even during winter months. Their robust steel walls and corrosion-resistant coatings make them suitable for permanent installation. However, proper winterization is crucial to maintain the pool's condition.

Steps to Winterize Your Bestway Hydrium Pool:

Balance the Water Chemistry: Ensure pH, alkalinity, and calcium hardness levels are within recommended ranges to prevent corrosion and scale build-up. Then, add a high chlorine dose.

Clean the Pool Thoroughly: Remove debris and vacuum the pool to prevent algae growth and staining during the off-season.

Lower the Water Level: Drain the pool water to about 4–6 inches below the skimmer to accommodate ice expansion.

Drain and Store Equipment: Remove and store pumps, filters, and other equipment in a dry place to prevent freeze damage.

Cover the Pool: Use a high-quality, tight-fitting winter cover to keep out debris and protect the pool surface.

By following these steps, you can safely leave your Bestway Hydrium pool up year-round, ensuring it remains in excellent condition for the next swimming season.

Maintaining optimal water quality in your Bestway Hydrium pool is essential for a safe and enjoyable swimming experience. Follow these steps to ensure your pool water remains clean and clear:

Regular Water Testing: Use a reliable pool water testing kit to monitor pH, chlorine, and alkalinity levels at least twice a week. The ideal pH range is between 7.2 and 7.6, and free chlorine levels should be maintained between 1 and 3 ppm.

Chemical Balancing: Adjust chemical levels as needed: pH Adjustments: Use pH increasers or decreasers to maintain the ideal pH range.

Sanitisation: Regularly add chlorine or bromine to disinfect the water and prevent algae growth.

Alkalinity Control: Keep total alkalinity between 80 and 120 ppm to stabilise pH levels.

Filtration System Maintenance: Run the pool's filtration system daily for at least 8–12 hours to circulate and filter the water effectively. Regularly clean or replace filter cartridges as.

Debris Removal: Use a pool skimmer to remove leaves, insects, and other debris from the water surface daily. Vacuum the pool floor weekly to eliminate settled dirt and prevent algae build-up.

Shock Treatment: Perform a weekly shock treatment by adding a higher dose of chlorine to eliminate contaminants and organic matter that regular sanitisation may miss. This helps in maintaining crystal-clear water.

Algae Prevention: Apply algaecide as a preventive measure, especially during hot weather or periods of heavy pool usage, to inhibit algae growth.

Maintain Water Levels: Ensure the water level remains at the midpoint of the skimmer opening. Low water levels can cause the pump to run dry, while high levels reduce the skimmer's efficiency.

Regular Inspections: Periodically inspect the pool's interior surfaces and equipment for signs of wear, leaks, or damage. Address any issues promptly to prevent them from affecting water quality.

By adhering to these maintenance practices, you can ensure that your Bestway Hydrium pool remains a clean, safe, and inviting environment for swimmers throughout the season.

Refer to our Pool Chemicals Guide https://bestwaystore.co.uk/pages/pool-chemical-guide for complete info on Bestway pool water maintenance.

Bestway Hydrium pools are renowned for their exceptional durability, often surpassing that of standard above-ground pools. Constructed with 100% galvanized steel walls and a heavy-duty paint coating, these pools offer superior strength and corrosion resistance, allowing them to remain assembled year-round, even during off-seasons. 

Key Durability Features of Bestway Hydrium Pools:

Galvanized Steel Walls: Provide robust structural integrity and enhanced longevity.

Heavy-Duty Paint Coating: Offers additional protection against corrosion and weather elements.

UV-Resistant Liner: Prevents discoloration and degradation from sun exposure.

In comparison to other above-ground pools, which may utilize materials like PVC or resin, Bestway Hydrium pools' steel construction delivers greater durability and stability. This makes them a reliable, long-term investment for families seeking a semi-permanent pool solution.

Proper maintenance, including regular cleaning and chemical balancing, is essential to maximize the lifespan of any pool. However, the sturdy construction of Bestway Hydrium pools inherently reduces the frequency of repairs and replacements, offering peace of mind and sustained enjoyment over the years.

Installing a Bestway Hydrium pool requires careful planning and adherence to the manual and instructions to ensure safety and longevity. Here's a step-by-step guide to assist you:

Select an Appropriate Location:

Choose a flat, level surface free from sharp objects, rocks, and debris.

Ensure the area is clear of overhead power lines and trees to prevent potential hazards.

Verify that the location complies with local regulations regarding pool placement and fencing requirements.

Prepare the Ground:

Remove grass, debris, stick or stones or that could damage the pool liner.

Level the ground meticulously; uneven surfaces can cause structural issues.

Lay a ground cloth or tarp to provide additional protection for the pool liner.

Assemble the Pool Structure:

Refer to the Bestway Hydrium owner's manual for detailed assembly instructions.

Begin by assembling the steel wall, ensuring all panels are securely connected.

Install the bottom and top rails, followed by the vertical supports, to form the pool's frame.

Install the Pool Liner:

Place the liner inside the assembled frame, ensuring it is centered and wrinkle-free.

Smooth out any folds to prevent damage and ensure an even surface.

Secure the liner to the top rails as per the manufacturer's guidelines.

Fill the Pool with Water:

Begin filling the pool slowly with water.

As the water level rises, continue to smooth out any remaining wrinkles in the liner.

Fill the pool until the water reaches approximately 6 inches (15 cm) below the top rail.

Connect the Filtration System:

Install the skimmer and return fittings according to the manufacturer's instructions.

Connect the filter pump and any additional equipment, ensuring all hoses are securely attached.

Prime the pump and test the filtration system to confirm proper operation.

Final Checks:

Inspect all connections, bolts, and fittings to ensure they are tight and secure.

Verify that the pool is level and the water is evenly distributed.

Ensure all safety features, such as ladders and barriers, are correctly installed.

Maintaining your Bestway Hydrium pool effectively requires the right accessories and maintenance tools. Here are some compatible options to consider:

Pool Covers: Protect your pool from debris and reduce evaporation with a durable cover. Bestway offers a range of pool covers suitable for Hydrium pools. 

Cleaning Kits: Keep your pool water clear with maintenance kits that include skimmers, vacuums, and telescopic poles. The Bestway Pool Cleaning Kit is designed for above-ground pools and includes essential tools for regular upkeep. 

Filter Pumps: Ensure proper water circulation and filtration with compatible filter pumps. Bestway provides various models that integrate seamlessly with Hydrium pools. 

Chemical Dispensers: Maintain balanced water chemistry using floating dispensers for chlorine or bromine tablets. Bestway's Pool & Hot Tub Chlorine Dispenser is a suitable
option. 

Replacement Parts: For specific components like skimmers, hoses, and fittings, Bestway Spare Parts offers compatible replacements tailored for Hydrium pools. 

Regular maintenance using these tools will help prolong the life of your Bestway Hydrium pool and ensure a safe swimming environment.