Bestway Fast Set pools are super quick to assemble and will only take you a few minutes to get ready for adding the water.
These pools work by inflating a top ring and then filling up with water. The inflatable ring will essentially 'float' on the surface of the water as it fills up and rises and the strong TriTech walls hold it all together - super simple.
Step 1: Get the ground ready for your Fast Set pool
Choose a flat area or the garden, and if you're going on a patio or decking, make sure that it can support the weight of a filled pool.
Make sure the surface is level, as uneven ground will have the water pressing up against one side of the pool. This could eventually lead to all kinds of trouble.
Remove any sharp objects like stones or branches that might puncture the liner. Once the area is prepped, you're ready to begin assembly.
Step 2: Assemble your Fast Set Pool
Follow these steps to set up your Bestway Fast Set™ pool:
- Lay a ground cloth (if included) on your chosen area.
- Spread out the pool on the ground or on the ground cloth.
- Close the drain valve securely to prevent leaks.
- Seal the water outlets by inserting the provided plugs.
- Inflate the top ring using a low-pressure air pump, like a Bestway air pump. Avoid high-pressure inflators, as they can damage the ring.
- Add a small amount of water and smooth out the liner to remove any folds.
- Fill the pool gradually; the top ring will rise naturally as the pool fills.
Step 3: Set up the filter for your Fast Set pool
